If you love to go all out with your Christmas decorating, here is a whimsical, original idea for your bathroom:

Materials needed:

White shower curtain, canvas, or fabric (a new canvas drop cloth works great) Shower curtain liner (to protect curtain from moisture) Projector* Permanent black marker, preferably a thick one Paint pens Paint Fiberfill or cotton balls Santa hat Black felt (about one yard) 2 red hand towels or red fabric

*If you can draw, you may not need the projector. If you are not artistically inclined, and do not already own a projector, see if you can borrow one.

Let's get started!

If you're using fabric instead of a shower curtain, you'll need to make it standard shower curtain size, which is about 72" x 72". Cut the fabric 73" x 73", fold each side over one half inch, press into place, and hem each side to make smooth edges. Purchase plastic rings (usually found near the curtain rods) and sew them to the top for shower curtain rings. If you don't already have a second rod, pick up a tension rod. They are inexpensive and simple to install.

The next step is finding a great picture of Santa Clause. Look in coloring books, storybooks, or online. Once you find a picture you like, blow it up on the projector until Santa looks life-sized. Hang the fabric or shower curtain on the wall or a door with thumbtacks or straight pins, and project the image onto it. Santa's knees should be about 6" from the bottom of the shower curtain. Stop at the knees and do not draw the rest of the legs (you will see why later).

Next, trace the image with a permanent black marker (put paper behind the curtain to keep marker from seeping through). Fill in the details for Santa's face as well as other intricate areas with the paint pens. Fill in his suit with paint. Nearly any kind of paint will do, but craft paint is the least expensive.

In order to create a three dimensional effect, use fiberfill or stretched out cotton balls for Santa's hair and beard. Apply with regular school glue or use fabric glue. Use a real Santa hat instead of painting one. These can be found at dollar stores and discount stores for very little money. Simply stitch the hat onto the curtain from the backside, or attach it with fabric glue.

Add a piece of black felt for Santa's belt. A real buckle makes a nice touch. You can remove a buckle from an old belt that you no longer wear and thread the felt through it, or you can purchase a used belt at a thrift store and simply remove the buckle to use it for this project. Stitch the felt into place or apply with fabric glue.

Hang the curtain and tuck the bottom edge inside the tub. Santa's knees should line up closely with the edge of the tub.

Here's the really fun part: Fold the red towels in half lengthwise and stitch or glue the sides together. If using fabric, cut to the size of regular hand towels (not fingertip towels) and proceed as directed above. Next, arrange the towels so that the attached edges are in the middle instead of along the side then press into place with a warm iron. This seam should face the shower curtain so it won't show. Stitch or glue the towels to Santa's knees. Santa now has three-dimensional legs that swing when the curtain moves!

Page 1 of 2 :: First | Last :: Prev | 1 2 | Next