How to Bed Edge your Omaha Landscaping

HomeLandscaping

  • Author Matt Novak
  • Published September 15, 2010
  • Word count 498

Bed edging looks very professional and is a way to enhance your Omaha Landscaping. Maybe retaining wall blocks and other edging isn't in your budget, but bed edging can be done in a weekend. Diamond Cut Lawns is a professional landscaping company that delivers stunning design concepts and is the preferred landscaper of many Omaha families and businesses. If you want to have your bed edging done by a professional company in Omaha, Diamond Cut Lawns is who to call at 402-676-1707.

For those Weekend Warriors, the Experts at Diamond Cut Lawns can show you how. There are six steps to follow when doing bed edging. We will go into detail of those six steps below.

Step 1: Cut the grass edge to form the landscape line. This is where you will layout the design of the landscape bed. We suggest using spray paint to lay out the cut line first. If you want straight or curved lines, this is where to make them so you can see how it looks before you cut the grass. Once you like the layout, cut the grass.

Step 2: Remove all sod and any other debris. At this point you should have bare dirt and plants. No grass clippings or twigs should be in the landscape bed. Even out any high spots so that the mulch can be spread evenly without high and low spots.

Step 3: Make sure there is a clean cut edge with the sides have a 3" flat wall. Use a flat shovel to make the sides straight and flat. It's important to have a flat wall because that will allow a solid amount of mulch to go here.

Step 4: Place mulch around all plants. Be sure not to suffocate them and allow the plants some breathing room. If you have old mulch, you may want to remove it or spread it out across the entire landscape bed and put new mulch over the entire area.

Step 5: Place mulch to the cut edge. You should have a clear distinction between mulch and grass. There should be no mixing of the two. If there is a mixing going on, perhaps you have some sod hanging over the cut edge or the cut edge wasn't flat.

Step 6: Make sure the entire landscape bed has an even coat of at least 2-3" thick. Check for high spots and try to even them out. The mulch should look like a blanket lying over the entire landscape bed. If it looks chunky or clear high and low spots, then you will want to even them.

Proper bed edging is a great low cost way to make your landscaping look great. Diamond Cut Lawns has several different colors of mulch available and can deliver the mulch to your doorstep too. Give Matt a call at 402-676-1707 to have him give you a quote for Bed Edging in the Omaha area or go to their website at www.diamondcutlawns.net and check them out for yourself.

Matt Novak has been a Landscaping Contractor for many years serving the Omaha Metro area. www.diamondcutlawns.net

Article source: https://articlebiz.com
This article has been viewed 815 times.

Rate article

Article comments

There are no posted comments.