In every industry, there are common phrases that catch people off guard. When you are talking with the various lighting design companies in Michigan, you will start to notice standard phrases. Since there are only several reputable event lighting companies in Michigan. This might be the best place to understand the lingo that comes along with your conversations. Remember that any company that you are considering should by able to justify why you will or will not need a specific element of lighting design without you having to talk like a lighting designer.

LEDs

Before we can even start explaining the differences in options, we first need to understand what is an LED. This is a light-emitting diode (LED) is a semiconductor light source that gives you an infinite amount of color changing possibilities. These are fixtures are usually the size of a soccer ball or laptop. These units are not only good for you, but they also have low impact on the environment. The fixtures have minimal power draw which also means they do not give off that much heat. Light Up My Event utilizes LED technology for a majority of it’s lighting applications.

Par-Cans

This method of lighting is considered old school. The drawbacks with par-cans, is that your room remains the same static color for the duration of the event. Also since these little cans get hot, people can get 3rd degree burns form accidental touching the outside of the housing. They have a high power draw which means they might pop a circuit during an important part of your event. If someone bases a quote on par-cans, think twice!

Gels

This is what par-cans use to mimic a specific color. A gel is a thin colored plastic strip used to create a color on the wall. This plastic pieces are cheap and come in sheets that you have to cut with a razor knife.

Uplighting

This is the most common solution companies will recommend when exploring possible avenues of lighting design. Basically what happens is computer controlled lighting fixtures are placed around the perimeter of your room to shine light up the walls (hence the term uplighting). Light Up My Event only used LED fixtures, so a data cord is connected to every fixture. This allows your light designer to program scenes and sync the color with the mood of your event.

Daisy Chain

This is the most common way LED fixtures have both power and data ran to them. Basically the unit has both an input and output. This means reduced time for setup/tear down. It also cuts down on the amount of cords, giving a simple cleaner look to the setup.

Gaff Tape

If you haven’t heard it yet, then you probably will eventually. Most venue managers prohibit duct tape from being used on surfaces. Not only does it leave a sticky residue, but it also peals paint and varnish from walls/floors. Since gaff tape is a cloth based adhesive, it works best in the places needed most. Light Up My Event uses gaff tape to get the job done.

Page 1 of 2 :: First | Last :: Prev | 1 2 | Next