Commercial Trucks and Safety - Use Backup Warning Devices and Save Lives!

Autos & TrucksTrucks

  • Author Christopher Hunter
  • Published December 21, 2010
  • Word count 536

Accidents related to commercial dump trucks commonly happen during the backing-up process. Hearing stories about people getting run over by a commercial vehicle while it is backing is unfortunately not uncommon. The reasons for this happening are certainly varied. The sheer size of the truck alone is a big contributing factor. Even with the aid of side mirrors, there are areas behind the truck known as ‘blind spots’ that are not visible to the truck driver.

Human Error Factor

Human error is a big contributor to the problem. Ideally, a spotter should be stationed behind the truck to assist the driver when backing up. Unfortunately, on many occasions when accidents have happened, the drivers involved have disregarded the need for a spotter and relied only on their side-view mirrors. This common practice has proven to be dangerous and even fatal.

Available Safety Devices

When considering the issues regarding commercial truck safety, it is important and helpful to know that there are systems that can help improve a truck's safety during backing up. Since it is apparent that spotters can be ignored, an alternative to consider are back-up warning devices that can be installed on the vehicle.

Three of the most common backup warning devices that can improve the safety of commercial dump trucks are: a back-up alarm, a back-up sensor and a back-up camera system.

Back-up alarm - A back-up alarm is basically an audible alarm that is activated whenever the truck is put in reverse. The device creates a loud beeping sound set to around 100 decibels to make it audible despite any background noise. The alarm is designed to alert anyone around the vehicle, warning them that the truck is backing up.

Anyone working behind the vehicle should then be able to hear the alarm and move away from the truck's path. This feature is standard equipment on most modern trucks. For models without this device, there are individually available backup alarm systems that can be purchased and installed on the truck.

Back-up Sensor - Another system that can improve the safety of a truck when backing up is a back-up sensor. The backup sensor is a device installed on the rear end of the vehicle. Whenever the truck is put in reverse, the sensor automatically monitors for any obstruction on the truck’s rear end. If there is any object that is detected within the vehicle’s path, an alarm located inside the cab automatically activates informing the driver about the obstacle.

Back-up Camera - On some trucks, instead of the conventional back-up sensor and/or alarm, they have a back-up camera system. These systems have a camera installed on the back end of the truck and a small LCD monitor in the cab. The camera can monitor everything that is behind the truck, feeding the driver a live image from the rear of the vehicle of anything or anyone that could affect a backing-up procedure.

Safety is always an issue that cannot be ignored. If your commercial dump trucks don't have any of these backup safety systems, now is the best time to have one installed. You can purchase any of these systems and install it to make your truck a safer vehicle.

Christopher M. Hunter is an expert in commercial specialty trucks. To find out more about Dump Truck Sales, go to the main website at: http://www.centraltrucksales.net/home.

Article source: https://articlebiz.com
This article has been viewed 954 times.

Rate article

Article comments

There are no posted comments.