What You Should Know About Wheelchair Seat-Depth

Wheelchair seat-depth is measured from the front to the back of the seat. To determine the existing size, you need to measure the distance from the front edge of the seat to the back where the seat meets the back-upright. This will give you a depth dimension of the existing seat.

Measuring to the back-rest upholstery may result in an incorrect measurement. Most back-upholstery is stretched and hung between two, free-standing, swinging supports (like a hammock), so measuring from the center of the seat to the center of the back-upholstery will result in a longer and incorrect dimension, as well. Some wheelchairs have add-on backs. Many of these mount forward of the back-uprights thus making unusable any seat surface located behind the add-on back.

To determine the appropriate seat depth for a user- the user should be placed in the best possible seated position that can be obtained. A measurement is taken from the back of the pelvis (furthest back part of the buttocks), forward to the back of the knee. Make sure that each leg is measured separately. There are more leg-length discrepancies (differences in leg-lengths) than you may think. From the measured length, for clearance, deduct 2".

If you have decided on an add-on back, you will need to allow for this. If the chosen back takes up seat space in front of the back uprights, you will have to add that amount back into the formula. If not, you will be scratching your head wondering why the seat appears so short on the finished product.

With no add-on back: (measured length) - (2" clearance) = depth

For chairs with an add-on back: (measured length) – (2" clearance) + (overlap-of-back on seat) = depth

Source listing of add-on wheelchair back-suppliers = www.usatechguide.org/techguide.php?vmode=1&catid=205

If there is a leg-length discrepancy (differences in leg length), custom upholstery, seat pans, or inserts can be ordered from the wheelchair manufacturer (sometimes) or from aftermarket suppliers. Many cushion manufacturers will also custom make their products to accommodate these differences.

PROS

• A proper wheelchair seat-depth will afford the user increased pressure reduction.

• It will also enhance comfort and will promote improved sitting posture.

• With as shallow a seat as possible will assure a shorter wheelchair frame (in a manual wheelchair) which will result in a lighter chair, decreased turning radius, and easier transporting and storage.

• A longer depth will serve to distribute pressure over a greater area (the surface area of the seat) thus reducing pressure in any given place. (This does not hold true if the user is sitting in the knees-up position with only the "sitting-bones" making seat contact. The pressure will still remain on these bones no matter how deep the seat is. If the thighs do not make contact with the seat, they will not aid in an even pressure distribution.)

Page 1 of 2 :: First | Last :: Prev | 1 2 | Next