If you are looking for a Turbocharger kit for your vehicle, no matter what size motor you have, you can find a wide variety of turbos available on Internet. However, it is important that you look into the Turbos are available, and to ensure that you find the right one for you. One excellent example is Garrett Turbos. Garrett is a spectacular manufacturer of Turbos, and the GT40/GT4088R is compatible for a variety of engines. This includes a rating of 370 to 650 horsepower, but his recommendation is for use on 3.5 to 5.0 liter engines. This makes it ideal for six, eight, 10 cylinder engines or larger, but there are many Hondas that are taking full advantage of Garrett Turbos and what they have to offer.
Garret turbos are extremely straightforward, as they are an excellent midrange Turbo, and provide oil and water-cooled CHRA, twin scroll turbine housing, an external waste gate and a ported compressor housing. This provides an increase in protection against surges, and it truly is excellent value for the price, because it is such a large ball bearing turbo. It is spectacular for low RPM, large displacement motors, but is not a good idea if you have a Honda Civic. The GT30R/GT3082R is excellent for Pro Street, because it proffers a smaller ball bearing turbo, which is ideal for 1.8 to 3.0 liter motors that are striving to put out up to 500 horsepower. The inlet flange is standard, with a T 3 on the entry, oil and water-cooled center and depending on your exhaust housing, engine size and will, you can choose from three different compressor wheel variations. These are 0.63, 0.82 and 1.06. With an open T3 turbine flange for internal or external waste heat, this is an excellent turbocharger for numerous applications. These turbos have been reported is producing for our horses and up to 26 pounds of boost. Garrett Turbos have been proven just off 15% faster than other market equivalents.
Quite possibly the most reliable turbocharger on the market that is rated 700 horsepower is the GT35R. Similar to the GT28R, this turbocharger offers a high-performance BCI-18, and has the UHP turbine. Simply put, this turbocharger will get you up to 30 pounds of boost and unbelievable acceleration. Particularly good for larger four and six cylinder engines, these turbocharger kits are available as standalone, or can be used as a twin set up on a V-8 engine. With standard fittings, four-bolt turbine outlet flange for standard housings, the only variations of this turbocharger, is the turbine housings have a 90-millimeter V band outlet. Because he so is an issue, when you use this Garrett turbo, you'll not have a problem with this, because the turbine housing is cast from extremely heat resistant nickel material, which will ensure that your turbo stays cool, and it also runs the classic oil and water cooled bearing system that all Garrett turbos offer. No matter what application you are looking for, Garrett turbos offer extreme performance under any condition, but at extraordinary prices.