Factory exhaust tips are usually one of those exhaust accessories that you want to yank out the moment you leave the shop with your new car. One, they lack quality and succumb to rust as soon as they hit the road. Two, they are usually not designed for performance or quality sound and three; they rarely reflect your taste and style. For whatever reason, you have found it necessary to replace you tips but have found that it is not as easy as you thought. Here are a few factors to consider for that quality customized finish you desire.
When choosing the size, you will need to be keen on two components. These are the diameter and length. The diameter of the inlet is the most important because it must fit perfectly onto your tailpipe. Tips come in various sizes depending on the type of your vehicle. For example, trucks and SUVs will usually have larger tips as compared to smaller cars. This is also true for different makes of vehicles so be keen when you order.
When considering length, you must choose something that is not too long to pose a risk to pedestrians or too short to vent the exhaust gases properly. Choose a length that will be functional and also look good.
When customizing your exhaust tips, you will also need to consider the type of material you want. There are two materials in the market depending on what you want. Chrome tips are made of mild steel and provide a great short-term look at a lower cost. On the contrary, if you are looking for durability, stainless steel tips are the thing for you. Shops such as MagnaFlow sell them at affordable prices.
If you are in the market for something that reflects your individuality, then this is your section. There are so many designs out in the market depending on shape (round, square, oval) and angle (turn down, wall-angle). There are also single walled and dual- walled tips. In such variety, you cannot lack something that gives your vehicle that personal tweak.
Clamps or welding?
Exhaust tips are either clamped or welded into place. Your choice depends on the money in your pocket or the style you desire. Clamping gives you the advantage of customization; you can install and remove them whenever you please. The disadvantage is that they may become lose due to vibrations and it may be tedious to keep tightening them.
Welding on the other hand gives you the tightest seal but will not be as flexible in terms of installation and removal and may cost you much more if you need to change you tips again. In this wealth of variety however, there must be something that will give your exhaust that personal tweak you are looking for.
Shops such as flowmaster and Magnaflow will provide a one stop shop for all your exhaust tip needs. You will also get more expert advice that the article may not have touched on. Changing exhaust tips has never been easier, go ahead and try it.