ArticleBiz.com :: Free article content
Authors: Maximum article exposure. Publishers: Reprintable article content.
BROWSE ARTICLES
ArticleBiz.com Home
Featured Articles
Recently Added Articles
Most Viewed Articles
Article Comments
Advanced Article Search
AUTHORS
Submit Article
Check Article Status
Author TOS
PUBLISHERS
RSS Article Feeds
Terms of Service

Tips And Tricks To Fix Blue Screen Of Death On Windows
Home Computers & Technology
By: Shawn Hook Email Article
Word Count: 532 Digg it | Del.icio.us it | Google it | StumbleUpon it

  

While operating a computer system, you might face different problems. Among all of them, the BSOD or blue screen error solutions is the most frustrating and annoying one. If you are a regular user of the computer system, then you might have come across such problem. The blue screen of death means there is something seriously wrong with your system and you have to detect it on your own. Sometimes the problems are not that serious as they seem to be. Basically, for these problems RAM, temperature, the hard drive should be responsible. Some easy steps and you can clear all the problems such as clear up hard disk space, run a virus scan, perform a repair installation, and repair faulty hardware. These are some basic solutions; this article contains some tricks and tips to stop error problems.

Give a thought to the recent changes you made
The most common cause of BSOD is the recent changes made by the user in computer hardware and settings. This is usually caused by the installation of new version or update. Drivers are the software that helps hardware to connect with window. If you have a restore point try to load it, though it may help or may not help.

Test your computerís temperature
Usually, when the system overheats, it leads to different problems. Blue screen of death is one of them. Overheating can be the reason of hardware malfunctioning. When the problem occurs, the user should first check the temperature and try to cool down the CPU.

Give a check to your computerís internal hardware
Sometimes a weak connection inside the computer can lead to BSOD. Open your system to check all the wires are well-connected with each other and make sure cards are seated firmly in their sockets. But if you have a laptop, this might be a little inconvenient for you. In this case, you should check the RAM and hard drive is well connected. Take a screw driver and remove the casket in the back and press the components firmly into their connection. So that the loose connection will mend up again.

Check your hard drive
Open the properties screen, select the toolbar. Click the button "check now" in the error checking section. Your system will re-start again to scan the device. A failing hard drive can cause blue screen because of the corrupted files. So, you should scan it.

Check your RAM
When RAM fails, it causes the system to hang and unstable. So, if the blue screen appears, you should take the help of a program called memtest86 and test RAM. This program is available online so you can download it. So, install the program on your system and it will run an automatic test to check your RAM. It will take some time. This program will run on its own until you stop it.
You can search online for BSOD stop error problem solutions. You can also take some other steps to fix this problem, such as, run a virus scan, boot into safe mode etc.

Get the best Laptop repair shops near Mississauga that enjoy a great deal of popularity at http://www.avltechno.com

Article Source: http://www.ArticleBiz.com

This article has been viewed 50 times.

Rate Article
Rating: 0 / 5 stars - 0 vote(s).

Article Comments
There are no comments for this article.

Leave A Reply
 Your Name
 Your Email Address [will not be published]
 Your Website [optional]
 What is two + one? [tell us you're human]
Notify me of followup comments via email


Related Articles


Copyright © 2017 by ArticleBiz.com. All rights reserved.

Terms of Service | Privacy Policy | Contact Us | Submit Article | Editorial