All tire manufacturers are taking extra efforts for developing products that increase tire life, improve fuel economy, and reducing tailpipe emissions from automobiles. Thus, consumers are getting all types of different and technologically advanced tires like silica-based tires, low-rolling resistance tires, etc. Nevertheless, as an end user, you will not get the maximum benefits from these technologies unless you maintain correct tire pressure. Thus, you must be aware of how to use tire inflator correctly.
It is highly important to check the level of tire pressure of your vehicle once in every fortnight. Most people follow this rule without fail, but some are not. A majority of motorists is not even bothered about checking air pressure regularly because they need to visit a tire shop or a gas station specifically for doing this task. But, you can do it very easily if you purchase a portable, electronic tire inflator. It is easy to operate a portable digital tire inflator. If you use this device, you can avoid unexpected incidents of a flat tire or an underinflated tire.
Steps to Make use of Tire Inflator?
As a preliminary step, you should connect the air inflator to a power socket. Most air inflators come with an extendable power cord, which is helpful for taking it close to the individual wheel. While using a tire inflator, you should keep the engine of the vehicle running, which is effective for avoiding draining of the car battery.
You should examine the condition of the tire before doing the task. If you find a large puncture, do not inflate the tire. In such cases, you can swap it with a spare wheel. You can also call for getting better assistance.
You can use the tire inflator if the tires are a little low on air or it has a slow leak. To inflate tires, you need to connect the nozzle of the compressor to the valve stem of the tire properly. Before turning on the compression pump, you should make sure that all connections are proper
Now, it is time to switch on the air flow inflator, which allows compressed atmosphere to enter inside the tire. This process should be done with proper care. If you hear any hissing sound, you should switch off the inflator. It makes a hissing audio because of improper connection. So, you can re-tighten the valve-stem connection and nozzle properly. An improper connection will lead to an surroundings leakage in the system.
You should stop and verify the air pressure periodically by using a pressure gauge, which prevents over-inflation. You should also check the recommended air pressure for your automobile. You can find it in the owner manual of your vehicle or on a placard on the driver door jamb.
It requires around 2-3 minutes inflating a fully flat tire. But, if the tire is slightly under-inflated, that you can do the job in 40-50 seconds. You should discharge the compressor nozzle safely after inflating the tire. You should loosen the connection only after switching off the inflator.