Here are some free CCNA 640-802, CCENT, and Cisco CCNP certification exam questions for you!

CCNA 640-802 Certification:

In LMI Autosense, how many LMI messages are initially sent by the DTE? How does the DCE respond?

Answer: The DTE sends three LMI messages, one of each type. The DCE then responds a single LMI message.

CCENT Certification:

How does the creation of a VLAN impact the default broadcast domain on a switch?

Answer: As you create VLANs, you're creating multiple broadcast domains, which in turn help to limit the scope of those broadcasts. When a host in a VLAN sends a broadcast, only hosts in that same VLAN will receive it. By default, all ports on a switch belong to the native VLAN, VLAN 1.

CCNP Certification / BSCI Exam:

Name the tables in which the EIGRP successor route can be seen.

Answer: The route and topology tables both hold the EIGRP successor. The feasible successor is found only in the topology table.

CCNP Certification / BCMSN Exam:

You're decided to implement Uplinkfast in your network. What switches should be configured with Uplinkfast, and which ones should not?

Answer: Cisco recommends that Uplinkfast be configured only on wiring closet switches - that is, switches at the Access layer of the Cisco switching model.

CCNP Certification / ISCW Exam:

Describe the basic purpose of a Cisco IOS Authentication Proxy.

Answer: The basic use of a Cisco IOS Authentication Proxy is the use of TACACS+, RADIUS, or local databases to authenticate FTP, Telnet, HTTP, and HTTPS sessions.

CCNP Certification / ONT Exam:

At which level(s) of the Cisco switching model should traffic classification and marking be avoided whenever possible?

Answer: Keep the classification and marking procedure aware from the Core layer, as the Core switches should be left to do what they need to do - high-speed switching!

Look for more CCNA 640-802, CCENT, and CCNP free exam questions from The Bryant Advantage!