Timing. Don’t go hiring window washers in broad daylight where the sun is at its peak. Same goes to window cleaners. When the windows dry---too quickly---streaks tend to surface. This is due to fact that before one can start wiping off the cleaning solution, the sun has already dried the same).

The Process: I’ll give you a quick run down of the basics. Remove dirt, soil, cobwebs and any other foreign objects in the windowsill and frame. Do this with the use of a brush or a hand-held vacuum. Place towels (or any absorbing material) along the sill to prevent the mixture from getting all over the place. Spray the cleaning solution or use a sponge to apply the same (squeeze all excess) on the glass window that needs work. Dry the window using the squeegee (strokes should be on one direction). Remember to keep the squeegee blade dry by wiping it on the cleaning cloth after each stroke.

These are just the basics. Every washer has obtained his own technique thru experience. Once you’ve mastered the basics, sooner or later, you’ll have your own way, your own system on how to effectively clean windows.

Page 2 of 2 :: First | Last :: Prev | 1 2 | Next