This will be the most unique part of creating a terrain for you will destroy some part of the building you made in order emphasized the damaged parts of the building. It's the best part actually. Don't be afraid and hesitate go ahead and try and you will see the result. But don't destroy all, randomly create explosion holes and bullet hole marks throughout the front sides. And going in for a closeup to see some added rebar which is glued in place .

Step 5 Prime building

Acrylic black paint is what to be use in priming the whole building. You can add some fine sand to texture your paint this will add a rough concrete like texture to the structure and will give a different look and result when its time to dry brush later.

Step 6 Paint building

Next step is paint the building with gray paint. Make sure not to put a lot of paint on the brush. Creating a dry brushed look with the gray paint exposing about 5 percent of the black is best. Otherwise priming it in black would be meaningless. After painting it with gray dry brush it with white paint but this time make sure it's a very light dry brushing. And finally add a light green to accent the building. Otherwise it would be gray only and dull. Also add variety on the floors by painting it with yellow and brown colors. Alas, there you have it! A simple multilevel building wrecked and blown up to give it character and unique look. We hope this inspires some nice terrain ideas. Feel free to tell us what you think of this project. Any ideas or suggestions are welcome and encouraged.

Page 2 of 2 :: First | Last :: Prev | 1 2 | Next