High-tech electronics makes a modern dimmer switch work, mainly through a transistor-like device called a Triode Alternating Current Switch (TRIAC). It controls the on and off function very rapidly at a rate of 120 times per second, which is too fast for the naked eye to see. Unlike the rheostat model, an electronic dimmer is highly efficient since more than ninety percent of the energy is converted into electricity. Thus, with an electronic dimmer switch, you can save money in two ways: first, on lower electricity bills and second, on longer bulb life. With an Anigmo Touchless Dimmer, you can have all these benefits as well as ease in installation, stylish design, and the modern convenience of sensor-based technology.

You do not need to be an electric engineer or an electrician to install the Anigmo Touchless Dimmer. Provided you strictly follow the installation instructions, Anigmo’s dimmer switch is quick and simple to install, with its color-coded wires and the ease with which it can fit into any standard wall box in your home and office. You do not need special tools either since the Anigmo Touchless Dimmer is ready for installation right out of its box. There is no risk of electrocution since the dimmer switch is automatically turned off when the decorator wall plate is detached from the control unit. Truly, the Anigmo Touchless Dimmer is safe and convenient to use, even if you do not have the "Electricity for Idiots" book with you.

With the Anigmo Touchless Dimmer, you can have it installed in three ways: conventional, flushed and recessed. In a conventional installation, the control unit looks like a regular switch with the wall plate on top of the wall surface. In a flushed installation, the control unit is flushed with wall surface. In recessed installation, the wall plate is recessed relative to wall surface. Depending on the wall material and the effect you wish to achieve, these installation types can be made even more artistic with the use of decorative covers, which you can either order in Anigmo’s pre-designed ceramic, wood, glass, stone, and photo materials or you can design one yourself.

Since the Anigmo Touchless Dimmer uses sensor-based technology, you do not need to make physical contact with the dimmer switch. Remember when you used to grope in the dark for the light switch only to be startled by the sudden brightness, which you will then adjust by tinkering yet again with the rotary dimmer control? With the Anigmo Touchless Dimmer, all that is a thing of the past. You just use your hand to turn on or turn off the dimmer and voila! You need not even re-adjust the brightness setting as it is an "intelligent device". At present, there are eight models of Anigmo Touchless Dimmer in their online store. The technical specifications vary (motor load, hertz, VAC, relay, incandescent/ fluorescent) but all can blend with the wall if desired, all operate silently (no more loud toggle clicks), all are touchless (obviously) and all work will all types of wall materials.