Using chocolate molds to mold chocolate is a very simple process and can be a lot of fun too! Chocolate molds are available in a variety of shapes and themes and can be found at your local craft store or at various on-line stores. You will also need to use chocolate melting wafers such as Merckens chocolate wafers, which are very easy to use and do not require the tempering that real chocolate does. We will cover chocolate tempering in another article. For now, let's start with the basics.

Select your desired chocolate molds and make sure they are clean and dry. Dig out your bag of lollipop sticks if the chocolate molds you are using require them. Get a two cup glass measuring cup and fill to the top with the chocolate melting wafers. We have tried several brands of chocolate melting wafers and find that Merckens chocolate wafers are by far the best tasting wafers. You can find much cheaper chocolate wafers at your local craft store but, in our opinion, they are very waxy tasting. As the old saying goes, you get what you pay for. Put the glass measuring cup (containing chocolate) in the microwave for one minute. Take out and stir. Now microwave at 30 second intervals, stirring in between, until melted. Be sure not to overheat or chocolate will seize up, get a grainy texture and taste burnt.

Once chocolate is melted it can be poured either directly from measuring cup, spooned, or squirted from a squeeze bottle in order to fill the mold. It is better to slightly under fill the mold rather than over fill. Overfilling the mold will cause the chocolate to run up and over the sides and will create a lip around the edge of the chocolate piece.

Once the chocolate mold is full, tap down on counter to release any air bubbles that may be trapped inside. You will be able to see the air bubbles releasing. Tap the chocolate mold until they all appear to be released. Failure to follow this step will create what appear to be holes or pockets on the surface of the chocolate. At this point you can add the lollipop sticks if necessary.

Put the filled chocolate mold in freezer for 5-10 minutes or until the chocolate has hardened. The time spent in the freezer will vary based on the size of the chocolate mold cavities. You basically want to leave it in the freezer for as long as it takes to harden. Be careful not to leave it in too long or the chocolate may actually freeze. In addition, you don't want condensation to build up on the chocolate as this will create a sticky mess and a dull looking piece of chocolate.

Once the chocolate has hardened remove chocolate mold from the freezer and tip over on to a plate or cookie sheet. The chocolates should pop right out. If any are stuck in the chocolate mold then tap gently on the counter to release. If they really are stuck, re-assess whether the chocolate has actually hardened. You may need to put them back into the freezer for a few minutes. If you are working with a deep mold you may have to pry a little on the mold in order to release.

Page 1 of 2 :: First | Last :: Prev | 1 2 | Next