ArticleBiz.com :: Free article content
Authors: Maximum article exposure. Publishers: Reprintable article content.
BROWSE ARTICLES
ArticleBiz.com Home
Featured Articles
Recently Added Articles
Most Viewed Articles
Article Comments
Advanced Article Search
AUTHORS
Submit Article
Check Article Status
Author TOS
PUBLISHERS
RSS Article Feeds
Terms of Service

How To Re-Paint A Clawfoot Tub
Home Home Home Improvement
By: Naomi West Email Article
Word Count: 418 Digg it | Del.icio.us it | Google it | StumbleUpon it

  

Clawfoot bathtubs are a tremendous characteristic that would look exceptional in almost any kind of house and bathroom. What makes them so particular is the design utilised for them and how they are contrasting from the common types of tubs. Their classical look makes them good to utilise in some of the most classic homes.

Individuals who are lucky enough to own a classic house will love the fact that they have these bathing tubs. The only problem with them is that the older they are the more chance the paint is already starting to strip. The first thing that many of us will think to do is to purchase a brand new bathing tub.

Yet, as we all know this is rather high-priced and sometimes we don’t want to have to drop the money it takes to perhaps have to buy not only a new bathing tub - but likewise new plumbing for it. Rather we could save money by putting on new paint ourselves. While this might take quite a bit of our time the results are good.

You will start off by utilizing masking tape and closing off the drain hole, faucet holes, and the roll rim. This will help to shield them and your plumbing system from the essential sandblasting that will be taking place. It is simpler to unplug it from the plumbing system and move it outside - but if you do not desire to do this you can utilize painter’s plastic and screen the regions of your bathroom.

Before you begin sandblasting the external edges of the tub you want to wear safety gloves and goggles. Most of these types of bathing tubs have porcelain on the interior. Make a point to only utilise it on the outside where the old paint is. After you have removed the paint look close at the tub and fix any spots you might have overlooked.

Cleanse it off with a damp cloth before you begin to paint. Ensure that the primer is set and you are able to do it rapidly because it can rust very quickly. Do at least one or two coats of primer that is specifically utilised for metal. Once it has dried you will be able to apply the paint you have chosen to use.

Whatever paint you are utilizing for your clawfoot bathtub needs to be able to hold up against moisture. After it is painted and dry you can take away the plastic and the masking tape.

Learn how you can Repair Clawfoot Tubs and the many ways in which you can Adorn Bathrooms with a new look to it.

Article Source:
http://www.articlebiz.com/article/383267-1-how-to-re-paint-a-clawfoot-tub/

This article has been viewed 3982 times.

Rate Article
Rating: 0 / 5 stars - 0 vote(s).

Article Comments
If you are remodeling or building from scratch, the hot item in
the bathroom décor is the antique clawfoot bathtub. The charm
of the clawfoot bathtub will add a warm and comfortable feeling
to your room.
July 08, 2009 12:57:55

Leave A Reply
 Your Name
 Your Email Address [will not be published]
 Your Website [optional]
 What is three + four? [tell us you're human]
Notify me of followup comments via email


Related Articles


Copyright © 2019 by ArticleBiz.com. All rights reserved.

Terms of Service | Privacy Policy | Contact Us | Submit Article | Editorial