ArticleBiz.com :: Free article content
Authors: Maximum article exposure. Publishers: Reprintable article content.  
BROWSE ARTICLES
ArticleBiz.com Home
Featured Articles
Recently Added Articles
Most Viewed Articles
Article Comments
Advanced Article Search
AUTHORS
Submit Article
Check Article Status
Author TOS
PUBLISHERS
RSS Article Feeds
Terms of Service

Thinking About Renovating Your Bathroom
Home :: Home :: Home Improvement
By: Scott Rodgers Email Article
Word Count: 1039 Digg it | Del.icio.us it | Google it | StumbleUpon it

  

Then you have to choose the sort of toilet. It is good to know the size, type and the amount of floor bolts of your current toilet. If you are installing it yourself, and you are not very experienced, you will find it simpler to put in a toilet that has the same measurements as your current one. However, this should not reduce you, but do take note of the amount of room you have in the bathroom. An elongated bowl toilet is two to three inches longer than the round bowl and creates an oval-like shape. This is very attractive, and may fulfil the look you are after, but it would be disastrous to complete installation and then discover that there's not enough room to comfortably sit on, given the placement of your bathtub or shower.

You may also want to install a quieter toilet, so you you might like to choose a one piece toilet where the tank and the toilet bowl are united, they have a lower profile and a flush mechanism that makes for a quieter flush.

You also need to have a look at the height of your toilet bowl, especially if there are people living in your house who have back or leg problems. The lower the toilet bowl, the more problematic you will find they will find it to sit on.

Another consideration is the material you choose for the various areas of your toilet. In most cases you'll discover that those using plastic parts are cheaper. This may suit how much money you have to spend, but do take note that you will find they will usually last not as long as other more costly options.

It is the same when you choose the materials for your faucets and shower heads. You will discover that the plastic options will do a good job, but in a relatively short period of time, plastic will stain and scratch and not look as attractive as, as an example, the chrome and stainless steel options that can look as good as new a number of years down the track if they are well maintained.

You also need to figure out what level of water pressure you need. Taps and shower heads are made to limit the water pressure to a certain level. So have a word with the people at your store and figure out what level you need.

Delimited Author Bio Resource Box

Scott Rodgers is a recently retired Los Angeles master plumber and is dedicated to helping you make your household renovations a great success. For more useful plumbing tips and information, visit Scott’s website: http://eLocalPlumbers.com

Page 2 of 2 :: First | Last :: Prev | 1 2 | Next

Scott Rodgers is a recently retired Los Angeles plumber and he loves to share his many years experience of baths and plumbing. For more useful tips and information, visit Scott’s website: http://eLocalPlumbers.com

Article Source: http://www.ArticleBiz.com

This article has been viewed 5 times.

Rate Article
Rating: 0 / 5 stars - 0 vote(s).

Article Comments
There are no comments for this article.

Leave A Reply
 Your Name
 Your Email Address [will not be published]
 Your Website [optional]
 What is eight + four? [tell us you're human]
Notify me of followup comments via email


Related Articles


Copyright © 2009 by ArticleBiz.com. All rights reserved.

Terms of Service | Privacy Policy | Contact Us | Submit Article | Editorial