Get a Handle on Installing Cabinet Hardware
- Author Leah Perry
- Published February 26, 2007
- Word count 447
Now that you’ve picked out the hardware of your dreams, you need only to install them to finish the look of your cabinets. If you’ve never installed hardware before, you might be intimidated by the idea of using a level or marking off the correct spots for placement; you might be particularly intimidated by the thought of using the dreaded drill.
Take a breath before you begin and don’t worry about the task ahead. The entire process is easy and fairly quick. Make sure to have the following tools on hand as you start. This will ensure a smooth process and will diminish the chance of a mishap.
-
Drill (most commonly a 3/16” drill bit)
-
Level
-
Marker
-
Masking tape
-
Nail or center punch (to make an indentation for where to start the drilling)
-
Screwdriver (Phillips or flathead depending on your specific hardware)
Knobs or handles
Whether you are installing knobs or handles, you should first try to choose a piece that has the same drill center(s) as the existing hardware. If you are choosing hardware for cabinets that haven’t been drilled before, knobs are the easiest choice since they have only one screw. Some types of knobs and handles come with attached screws, making a simple procedure even more effortless.
If you’ve chosen to install pulls or handles, you’ll need to measure the distance between the drill centers. Do not measure the length of the handle, as the handle itself may extend beyond the drill centers.
Let the installation begin
Solid wooden cabinets and drawers might split as a result of drilling into them. In order to avoid this, refrain from drilling holes closer than an inch from the edge.
Standard contemporary flat-panel doors are complemented nicely by knobs installed 1 ½” to 2” from the open corner of the door. Pulls should be installed 2” – 4” from the bottom horizontal edge of the door and 2” from the open vertical edge. After you’ve marked off the correct places for drilling, simply drill holes and insert the hardware screws into the holes. Match up the screws and the handle or knob and, using your screwdriver, tighten until the hardware doesn’t wobble.
In general, cabinet doors are made of the ¾” lumber; in this situation, the standard 1” screw will fit perfectly. Drawers with applied faces, for example, might be thicker than usual and will likely require longer screws. When purchasing hardware, be sure to specify to the vendor your special requirements.
Now, with all of this new information, you are ready to get busy! Install your new hardware and give your cabinets a face lift. Who knew that such a straightforward process could yield such beautiful results?
Freelance writer and home improvement expert, Leah Perry is newly married. She writes about the different techniques of home design and decorating as she applies them in her own house. For more great ways to organize your home, check out Kitchen-Cabinet-Hardware.com
Article source: https://articlebiz.comRate article
Article comments
There are no posted comments.
Related articles
- Smart Savings: The Benefits of Buying Out of Season
- How to prepare for a house clearance, a few tips from experts
- Expert and Little Known Tips for Limestone Floor Maintenance
- Top Furniture: Discover the Best of Deutsch Design
- Spring Clean Like a Pro
- Spring into Clean: Transform Your Home with Diamond Home Support Barking
- Spring Cleaning Magic: Unveiling a Fresher Home
- Top Cleaning Tips for the Spring
- The Lemon: Nature's Remarkable Cleaning Marvel
- Why Tree Removal is Essential for Home Safety
- The Dos and Don'ts of DIY Pressure Washing: Expert Tips and Tricks
- Are Silver Travertine Tiles Better Than Other Alternatives? Know How!
- Rustic woodgrain farmhouse cottage with vintage carved barn doors
- Ultimate Guide to Versatile and Secure Storage Cabinets with Locks: A Functional and Practical Solution for Every Space
- The Ultimate Guide to Investing in a Home Lift
- holistic garden sanctuary, buddha statues
- Vintage rustic wood credenzas
- Nature carved Barn Doors
- 7 things you must know before building, extending or renovating your home.
- The Impact of Electrical Upgrades on Home Resale Value in Australia
- Rodent-Proofing Your Home: Tips and Tricks
- How Much Does House Removal Cost in Australia? Understanding Your Moving Budget
- Advantages of Using Ceramic and Porcelain Tiles at Home and Commercial Places
- Culinary Chronicles: A Journey Through Kitchen Renovations
- The Advantages of Using a Professional Cleaner in Liverpool
- Crafting Culinary Sanctuaries: The Poetic Essence of Kitchen Remodeling
- The Importance of Using Professional Tilers for Regrouting Bathroom Tiles
- Making Eco-Conscious Decisions in Home Renovations
- Advantages of Engaging Expert Home Cleaners in Bournemouth
- How To Declutter Your Home - In 5 Simple Steps